MSE Sub-Sector Briefing: Wood Processing (2013)

Speeches Shim

Issue. Certain process, technique, and management deficits are commonly found in micro- and small-scale wood processing and furniture making operations. These deficits can have serious adverse effects on short- or long-term business performance---AND, on the local environment and on community health and safety. Among the most significant areas where economic savings can be realized through cleaner production are management actions that address air pollution from adhesives, air pollution from coating materials, noise pollution, contamination of soil and water, generation of hazardous waste, and excess wood waste.

Response. Addressing these deficits by adopting resource-efficient and cleaner production (RECP) processes, techniques, and management practices can reduce costs and improve business performance and, at the same time, avoid or minimize adverse impacts on the local environment and on community health and safety. RECP approaches generally focus on improving resource and production efficiency which saves physical and energy resources, time, and money needed in production—and results in less waste and pollution. This briefing supports the application of RECP solutions in these six key areas.

Contents. This briefing addresses each deficit area in turn. General business, environmental and health and safety issues are identified first. Then, a question and answer format is used to identify specific deficits and potential RECP solutions. The References and Resources section at the end of this briefing provides more detailed and quantitative information on these solutions.

Audience. This briefing is intended for business development services providers working directly with wood processing and furniture making MSEs, for those designing MSE strengthening projects, and for USAID staff (and the staff of other funding organizations) charged with overseeing projects in the wood processing and furniture making sector.

Scope. This briefing focuses on MSEs that are in the wood processing and furniture making industry. However, some of the solutions outlined in this briefing could also be applied to MSEs that are using similar processes for similar materials or parts.

Wednesday, May 8, 2019 - 8:45am

Last updated: May 08, 2019